Bow’s On Clothing

 

 

 

 

 

 

 

The BOW!!!!! Not the outfit!!!!

This looks pretty…difficult but its actually really simple!!!

1) THE FABRIC!!!!!!!

2) This one you need to pay attention for… Make a cut of your “Ribbon” I’ll say, approx. 45cm and fold both ends but leave a 2cm square inbetween, sew the folded “bunny ears” to the same ribbon (if that makes sense??!!) Then cut another two lenghts for your tails of the bow. Place them at the bottom of the 2cm square, sew! Then just sew the top of the square, just to make it look right!!! Sew that to the shirt after you have sewn any length onto the top, For detail!!

The Outfit!!! TOP

Measure then double check!!! For the top, measure the shoulder width, bust, length of torso, arm width, and waist!! But for this top just the shoulder width length of torso and arm width!! Most importantly know what you want… and for this piece wider and flowy!!! I would double your arm length and make a deeper neck line. To put the shirt together you must cut each individual side and sew together!!! If you need a refrence grab one of your shirts! Hint: Make the shirt inside out then, when finished, turn it out and the seems are hidden;) Works great!!!

The Outfit!!! Skirt

Measure then double check!!! For the bottom you should measure the waist (for higher up skirts espicaily), hips, and thigh (also for tighter skirts and skinny jeans!!!) and length or the skirt. After doing this your ready to assemble!!! Also create this inside out first!!! Just use two pieces that are roughly the length you want and sew it almost all the way, leave some room for the zipper of bottons!!! The zipper you simply sew the two sides onto the skirt, and the bottons you have to hand assemble!!!

To make it a dress you can put it on and pin it, take it off and sew it together

 

Hope this helps!!

Thanx… DIYANGEL xoxox

Teddy Bear

Teddy Bear

Easy.. No!! Fun and a learning experience… Sure!!! NO, I think this is easy-ish if you really understand how (which is why I’m here!!)

1) GET THE FABRIC!!!!!!!

2) Get some cotton balls or stuffing (non-eddiable!!!;))

3) Sew in pieces then assemble. For example, A circle. cut out two circles in the fabric and sew half way, stuff!! Sew back up!!

To assemble

You could just hot glue them toghether, trust me that works!! Or you could sew where the two meet by hand!! Either works just fine

Hope this little guy will be in your future!!! 😉

Thanxx… DIYANGEL xoxo

Holiday Wreath

Holiday Wreath

A Simple wreath that anyone could do! Materials below!!

1) Foam or plastic ring ( or you could take a sewing ring and wrap yarn around the rim, that wont give this affect though)

2) Papper cut into the shape of petals ( Then you take a screw driver and push the corner into the ring, Do that for all!!)

Hope this helpped!!

Thanx… DIYANGEL Xoxo

Candy Jars

Candy Jars

Candy Jars!!! Redone old candelabras with a jar that fits on top!!!! To simple!!! But you could use them in many ways, like in the bathroom to hold bobby pins or Q-Tips.

Hope this inspired you to create anything you set your minds to!!

Thanx… DIYANGEL XoXOxO

Owl Plushie or Phone Case!!

Owl Plushie or Phone Case!!

1) Felt or softer material, and many colours of it!!!!

2) Sewing machine or needle and thread!! (For a vintage look try yarn instead of regular string)

How to make a… Plushie version

First, find your base colour and make two of the same sizes (make them 2-5 cm longer on each side) Then cut out the shapes and sew them to one of the two base squares. After that sew the other base piece to the first one but leave space at the top (just sew up both sides and the bottom only) Put stuffing inside and sew up the last side (the top).

How to make a… Phone case

do the same thing as the top only don’t stuff it and keep the top side opened!!

Hope This helped!!!
Thanx… DIYANGEL XoXOxO

Drawers!!

DIY Drawers

These are absaloutly so usefull for your everyday life!! Materials down below!!

1) You know my reconmended woods!!! (MDF Board!!)

2) You would also need some baseboard moulding!! Just to create the rivets on both the bottom and top!!

3) Screw driver or drill ( whichever you prefer!!)

4) Modern, or not, paint!!!! Different colours looks best!! If you want to be extremly artistic, paint each side a different colour!!

5) And this is optional!! Drawers!! You could make them, just by your for pieces of MDF and baseboard connected to the front piece and of course a knob!! Or take from other cabnets around the house!!! Trust me it would look great!! Heres a picture of another idea!

Comment on what you think!! LIKE TOO!!!

Thanx… DIYANGEL XoXo ❤